Simrad SP270 Manual de Instalação descarregar pdf (Página 28)

Simrad SP270

851-160571 / B

• Place the carton on a stable work bench or on the floor with

the top of the carton uppermost.

• In the absence of other instructions, always open the top of

the carton first. The contents will normally have been

lowered into the carton from above, so this will usually be

the easiest route to follow.

- Care must be used when opening the carton to ensure the

contents are not damaged.

Caution Do not use a knife to open cardboard cartons - the

contents may lie close to the surface, and may be

damaged by the blade.

• If the carton has been closed using staples, remove the staples

from the carton as you open it. This will reduce the

possibilities of scratch injury to yourself and damage to the

contents.

• If a wooden crate has been closed using screws, always

remove them using a screw-driver. Do not attempt to prise

the lid off with a crow-bar or similar.

• Once the carton is open, carefully remove all loose packing

and insulation material. Check for manuals and other

documents that may have been added to the carton during

packing, and put these to one side. Check also for special

tools, door keys etc.

Electronic and electro-mechanical units

Caution BewareofthedangersofElectro-StaticDischarge

(ESD) both to yourself and to the equipment, when

handling electronic units and components. Refer to the

precautions starting on page 18.

Electronic and electro-mechanical units will normally be

wrapped in a clear plastic bag. Lift the unit, in its bag, out of the

carton and place it in a stable position on the floor/work bench.

Inspect the unit for damage before opening the plastic bag.

Note Cables must never be used as carrying handles or lifting points.

Note Do not break the seal to open a circuit board package before the

board is to be used. If the board package is returned to the

manufacturers with the seal broken, the contents will be

assumed to have been used and the customer will be billed

accordingly.

Assuming all is well, open the bag and remove the unit.

Open the unit and check inside. Remove any packing and

desiccant material that may be inside.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 253 254

Comentários a estes Manuais

Sem comentários

Simrad SP270 Manual de Instalação Página 28

Comentários a estes Manuais

Manuais e produtos relacionados com não Simrad SP270