Simrad SP270 Manual de Instalação descarregar pdf (Página 108)

Simrad SP 270

Selec'f'

the" MIDDLE position by a

short press on the

HOIST button

, and check if the

text HOISTING:

MIDDLE is shown in

the menu. Check that both the

HOIST and LOWER buttons light

during the

hoisting,

and that both extinguish when the transducer

stops in

the middle position. The menu should now show the text

TRANSD. POS: MIDDLE.

Press the

HOIST button, and

check if the

text

HOISTING: UPPER is shown in the

menu. Also check

that both buttons light during the hoisting, and that only

the HOIST button lights when the transducer

stops in the

fully hoisted position. The menu should

now show the

text TRANSD. POS: UPPER.

Press the LOWER button for

approximately 2 seconds

and check if the text LOWERING: LOWER is shown in

the menu. Also check that both

buttons light during the

lowering, and that only the LOWER button lights when

the transducer stops in the

fully lowered position. The

menu should now show the text TRANSD. POS: LOWER.

Press the HOIST button for approximately 2 seconds

, and

check if the text HOISTING: UPPER is shown in the

menu. Also

check that both buttons light

during the

hoisting, and that only the HOIST

button lights when the

transducer stops in the fully hoisted position. The menu

should now show the text TRANSD. POS: UPPER.

Set the switch in the motor control

unit to STOP position.

Switch OFF the Sonar Control Unit by

pressing the

ON/OFF:-HOIST button for approximately 2 seconds.

160573/A

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 253 254

Comentários a estes Manuais

Sem comentários

Simrad SP270 Manual de Instalação Página 108

Comentários a estes Manuais

Manuais e produtos relacionados com não Simrad SP270