Simrad FS70 - REV 3 Manual de Instalação

Kongsberg Mesotech Ltd. Port Coquitlam, BC - Canada FS 70 Trawl Sonar System Operator Manual SIMRAD

FS70 Trawl Sonar System X 974-24007001/4.1 <This page is left intentionally blank>

FS70 Trawl Sonar System 90 974-24007001/4.1

974-24007001/4.1 91

FS70 Trawl Sonar System 92 974-24007001/4.1

974-24007001/4.1 93

FS70 Trawl Sonar System 94 974-24007001/4.1 <This page is left intentionally blank>

974-24007001/4.1 95 ANNEX A - FS SONAR TEST REPORT Boat Name: ________________________________ Head Type: _____________

FS70 Trawl Sonar System 96 974-24007001/4.1 <This page is left intentionally blank>

974-24007001/4.1 97 WARRANTY POLICY Effective January 1, 2010 Kongsberg Mesotech Ltd. Warrants each new product (equipment) to be free of def

FS70 Trawl Sonar System 98 974-24007001/4.1 Consumable Materials: Consumable materials, such as lamps, fuses, O-rings, gaskets and bat

<This page is left intentionally blank>

System Familiarization 974-24007001/4.1 1 1 SYSTEM FAMILIARIZATION 1.1 Overview The SIMRAD FS 70 Series is a third wire trawl monitoring syst

2010 Kongsberg Mesotech SIMRAD

FS70 Trawl Sonar System 2 974-24007001/4.1 1.2 Equipment List A typical FS70 Trawl Monitoring System consists of: FS 70 Deployment Housing

System Familiarization 974-24007001/4.1 3 FS70 - 40 kHz System Configuration OverviewSIMRAD POWER / TTMRS232 or USB/RS232200 kHz Sounder40/70

FS70 Trawl Sonar System 4 974-24007001/4.1 1.5 Processor Unit The FS 70 19” Rack mounted Industrial Processing unit is the control u

System Familiarization 974-24007001/4.1 5 A test cable connector and selection switch between the trawl cable and test cable are accessible

FS70 Trawl Sonar System 6 974-24007001/4.1 1.9 Catch Sensors The catch sensor “eggs” are wireless sensors mounted on the cod-end of the tra

System Familiarization 974-24007001/4.1 7 Cable winches are delivered in different types and with different capacities; low-pressure

FS70 Trawl Sonar System 8 974-24007001/4.1 2 THEORY OF OPERATION 2.1 Introduction This section explains the theory of operation of th

Theory of Operation 974-24007001/4.1 9 2.4 Forming an Image The sound pulse projected will be attenuated as it travels through the water from

FS70 Trawl Sonar System 10 974-24007001/4.1 2.5 Key Features Setting The following paragraph will explain some of the key features of the FS 7

Theory of Operation 974-24007001/4.1 11 2.5.4 Pulse Length Control The FS 70 Trawl Sonar Heads are capable of changing the acoustic pulse len

FS70 Trawl Sonar System 12 974-24007001/4.1 3 FS 70 SYSTEM OPERATION 3.1 Introduction The typical screen display for FS 70 Sonar Processor cons

FS 70 System Operation 974-24007001/4.1 13 This chapter describes the navigation through the menu system and explains the adjustments to the me

FS70 Trawl Sonar System 14 974-24007001/4.1 The Sonar Control Panel located above is divided into 7 tabbed Pages: Page 1 “Operation”,

FS 70 System Operation 974-24007001/4.1 15 3.2.2 Display Control Panel Page The main Display” control panel allows you to select the

FS70 Trawl Sonar System 16 974-24007001/4.1 The main “Setup” control panel allows you to set up system parameters for the active sonar

FS 70 System Operation 974-24007001/4.1 17 By placing the mouse cursor on the “Setup Fish Sensors” button and then left clicking t

FS70 Trawl Sonar System 18 974-24007001/4.1 3.2.5.1 PI 40 kHz Channel Sensors Setup

FS 70 System Operation 974-24007001/4.1 19 The next step after the above operation, for example, will be to add a catch sensor. Click on “sens

974-24007001/4.1 III 974-24007001/4.1 FS70 Trawl Sonar System Operator manual

FS70 Trawl Sonar System 20 974-24007001/4.1 NOTE: For additional information on the Simrad PI Sensors Setup, please refer to your PI Instructio

FS 70 System Operation 974-24007001/4.1 21 NOTE: The PI sensor setup menus are not available if you are using a 70 kHz Catch Sensors

FS70 Trawl Sonar System 22 974-24007001/4.1 The Catch Sensor windows will be displayed automatically when you left click on the Catch W

FS 70 System Operation 974-24007001/4.1 23 3.2.10 Advanced Operation TVG Mode Example of some of the controls located in the Advance panel

FS70 Trawl Sonar System 24 974-24007001/4.1 The Toolbar will automatically pop-up on the left side of the screen. Move the mouse cursor up

FS 70 System Operation 974-24007001/4.1 25 3.3 Display Tools Selection By placing the mouse cursor on the TOOLS button and then right clicking

FS70 Trawl Sonar System 26 974-24007001/4.1 NOTE: Additional information from the above menu can also be displayed. 3.5 Language Selection

FS 70 System Operation 974-24007001/4.1 27 Right Click on the “AUDIO” button located in the SETUP Page to open the Audio Settings dialog wind

FS70 Trawl Sonar System 28 974-24007001/4.1 NOTE: If you only want to “PAUSE” the sonar image, just right click the mouse on the

FS 70 Installation Instructions 974-24007001/4.1 29 4 FS 70 INSTALLATION INSTRUCTIONS 4.1 Installation procedure The installation of the FS 7

FS70 Trawl Sonar System IV 974-24007001/4.1 Document revisions Version Date Written by Checked by Approved by 4.1 January 04, 2011 LF/BC JH BC

FS70 Trawl Sonar System 30 974-24007001/4.1 If you have not selected the Rack Mounted System, the FS 70 Processing unit should be mou

FS 70 Installation Instructions 974-24007001/4.1 31 4.2.3 Display Unit Either an LCD/DVI or VGA monitor may be connected to the FS 70 Proce

FS70 Trawl Sonar System 32 974-24007001/4.1 4.2.5 Connecting the Processing Unit The FS 70 Processor unit comes with the FS 70 Trawl Sonar Sys

FS 70 Installation Instructions 974-24007001/4.1 33 4.2.6 Interconnect Cables Description ID # Application Description C1 Video Connection S

FS70 Trawl Sonar System 34 974-24007001/4.1 4.2.8 Connecting the USB/RS232 to the TTM Unit Connect the 2 meter USB cable to the USB/RS232 Conve

FS 70 Installation Instructions 974-24007001/4.1 35 4.2.9 Optional Ethernet Server Device Specification Your FS 70 Processing Unit may come

FS70 Trawl Sonar System 36 974-24007001/4.1 4.2.10 Connecting the Optional Ethernet Server Device to the TTM Unit Connect the supplied

FS 70 Installation Instructions 974-24007001/4.1 37 4.2.11 Connecting a GPS The GPS NMEA 183 output can be connected to the serial port at th

FS70 Trawl Sonar System 38 974-24007001/4.1 4.2.14 Connection to Cable Winch/Slip-Rings The connection between the FS TTM Interface unit and t

FS 70 Installation Instructions 974-24007001/4.1 39 A locating block located at the end of the housing or a guide bracket is used to prevent

974-24007001/4.1 V Table of contents 1 SYSTEM FAMILIARIZATION ... 1

FS70 Trawl Sonar System 40 974-24007001/4.1 Where “X” is a decimal number between 1 and 254, the number “0” and “255” are reserved numbers

FS 70 Installation Instructions 974-24007001/4.1 41 Next, scroll down to the “Internet Protocol (TCP9/IP) as indicated in the above window a

FS70 Trawl Sonar System 42 974-24007001/4.1 exited the above window, you should re-check to make sure the new IP address is saved.

FS 70 Installation Instructions 974-24007001/4.1 43 4.3.3 Security Firewall Protection System Set-Up The Firewall protection is an important p

FS70 Trawl Sonar System 44 974-24007001/4.1 The best approach is by having the Firewall protection turn “On” at all time. Then after you have in

FS 70 Installation Instructions 974-24007001/4.1 45 on the “200VDC” setting and approximately 60 volts if on “TEST” setting. The current m

FS70 Trawl Sonar System 46 974-24007001/4.1 4.3.7 FS 70 Start-up Procedure For the purpose of demonstrating the Start-up Procedure in

FS 70 Installation Instructions 974-24007001/4.1 47 After the “Detect Heads” the above Window will pop up, note that no Com ports have bee

FS70 Trawl Sonar System 48 974-24007001/4.1 Next, the “System Configuration” window will reappear. Use the mouse to highlight KML-USB 1

FS 70 Installation Instructions 974-24007001/4.1 49 “Click” on “Apply”. The following window will appear, overlaying the above window, asking y

FS70 Trawl Sonar System VI 974-24007001/4.1 3.2.5.1 PI 40 kHz Channel Sensors Setup ...

FS70 Trawl Sonar System 50 974-24007001/4.1 By clicking on the “Vertical Window” of the Sounder Window you will have control over the selec

FS 70 Installation Instructions 974-24007001/4.1 51 By clicking on the appropriate key, you will be able to setup your control setting, i.e. G

FS70 Trawl Sonar System 52 974-24007001/4.1 By clicking on the appropriate key, The Depth and Temperature range can also be changed. 4

FS 70 Installation Instructions 974-24007001/4.1 53 4.3.13 Transmit Setting By selecting and clicking on the “Transmit” key on the

FS70 Trawl Sonar System 54 974-24007001/4.1 By clicking on the appropriate key, you will be able to setup your Transmitter configuration in ord

FS 70 Installation Instructions 974-24007001/4.1 55 4.3.15 TVG Page Setting By selecting and clicking on the “TVG Page” key on the

FS70 Trawl Sonar System 56 974-24007001/4.1 4.3.16 Sensors Page By selecting and clicking on the “Sensors Page” key on the above window, the fo

FS 70 Installation Instructions 974-24007001/4.1 57 4.3.17 Auxiliary Transducer (Net Sounder) By Clicking on the “Auxiliary Transducer”

FS70 Trawl Sonar System 58 974-24007001/4.1 4.3.18 Save User setting After you have completed your system configuration, you should “SAV

FS 70 Installation Instructions 974-24007001/4.1 59 4.3.19 Add User Setting After you have completed your system configuration you sho

974-24007001/4.1 VII 4.3.1 FS Processor & TTM Communication set-Up ... 39 4.3.2 Optional Eth

FS70 Trawl Sonar System 60 974-24007001/4.1 4.3.20 Final System Test After preparing the trawl cable and before the final trawl unit

FS 70 Installation Instructions 974-24007001/4.1 61 The plastic strain relief attached to the trawl cable is now placed in the trawl unit housi

FS70 Trawl Sonar System 62 974-24007001/4.1 4.3.23 Mounting the Geometry Sensors

FS 70 Installation Instructions 974-24007001/4.1 63 The PI Geometry sensors are mounted behind the headrope at the top of the trawl opening

FS70 Trawl Sonar System 64 974-24007001/4.1 5 TROUBLESHOOTING AND MAINTENANCE 5.1 Introduction This section provides instructions for the

Troubleshooting and Maintenance 974-24007001/4.1 65 1. Trawl cable and/or winch slip-ring problems, 2. Sonar head and sensor module connector

FS70 Trawl Sonar System 66 974-24007001/4.1 connector mating surface must be protected from moisture and dirt at all times. Failure to do this

Troubleshooting and Maintenance 974-24007001/4.1 67 5.3.2.3 Connector Maintenance Proper connector maintenance is crucial to the prevent

FS70 Trawl Sonar System 68 974-24007001/4.1 NOTE: As with all electronics, careful handling of the trawl unit will reduce the likelihood of FS

Troubleshooting and Maintenance 974-24007001/4.1 69 5.3.4 Winch Slip-Rings and Trawl Cable The winch slip-rings and trawl cable are the umbilic

FS70 Trawl Sonar System VIII 974-24007001/4.1 5.3.2.3 Connector Maintenance...

FS70 Trawl Sonar System 70 974-24007001/4.1 5.4 On-board System Troubleshooting There are a number of tools available with the FS Trawl Monito

Troubleshooting and Maintenance 974-24007001/4.1 71 5.4.2 Test Cable With every FS Trawl Monitoring system a 50’ test cable is supplied for te

FS70 Trawl Sonar System 72 974-24007001/4.1 A test for slip-ring problems is to slow down the winch (at high winch speeds you wil

Troubleshooting and Maintenance 974-24007001/4.1 73 5.4.5 Testing the Trawl Cable If after testing the FS system the trawl cable is s

FS70 Trawl Sonar System 74 974-24007001/4.1 Signal Attenuation Through Cable: <40 dB (1/100 signal amplitude) @ 55 kHz <20 dB (1/10 s

Troubleshooting and Maintenance 974-24007001/4.1 75 Example: The TTM output DC voltage is set at 200 VDC. The Cable Voltage at the head is 19

FS70 Trawl Sonar System 76 974-24007001/4.1 5.4.6 Telemetry Errors In the normal operation of the FS Trawl Monitoring system commands

Troubleshooting and Maintenance 974-24007001/4.1 77 5.4.8 System Info Page The System Info Page provides all the pertinent information

FS70 Trawl Sonar System 78 974-24007001/4.1 To take a snapshot of your display simply left click on the camera icon. A snapshot will be sa

Troubleshooting and Maintenance 974-24007001/4.1 79 5.4.11 Automatic Recordings The system is also automatically recording your display without

974-24007001/4.1 IX <This page is left intentionally blank>

FS70 Trawl Sonar System 80 974-24007001/4.1 Record folder: Any recordings that you manually start All of these files are date and

Troubleshooting and Maintenance 974-24007001/4.1 81 5.4.14 Troubleshooting Problems The first step in troubleshooting the problem would be to r

FS70 Trawl Sonar System 82 974-24007001/4.1 5.4.16 Host FS70 Software Start-up Sequence of Events In this section we will be addressing the te

Troubleshooting and Maintenance 974-24007001/4.1 83 the values being uplinked and re-written back to the DACs. The final values written

FS70 Trawl Sonar System 84 974-24007001/4.1 If no sensor information is displayed on the sonar image you may have a problem with the sensor

Troubleshooting and Maintenance 974-24007001/4.1 85 Sonar head operates correctly but the cable gain is higher than normal and telemetry errors m

FS70 Trawl Sonar System 86 974-24007001/4.1 6 DRAWINGS Drawings List 436-00411000 - Test Cable 901-60181001 - FS power/TTM Outl

974-24007001/4.1 87

FS70 Trawl Sonar System 88 974-24007001/4.1

974-24007001/4.1 89