Simrad GC80 Manual de Instruções descarregar pdf (Página 43)

INSTALLATION

20221511 / C 35

Control unit

The Control unit is bulkhead mounted by using 4 bolts as shown

in the illustration.

Flush mounting the control panel

The control panel may be removed from the Control unit

and mounted in a remote location by using the optional

flush mounting kit (part number 27101757).

The flush mounting kit includes:

- 1 flush mounting panel

- 4 corners

- 4 mounting screws

- 1 blind cover

In addition to this kit, an optional control panel cable must

be ordered. The cable is available in three different lengths:

- 5m (part no. 44170736)

- 10m (part no. 44170744)

- 15m (part no. 44170751).

Use the following procedure when mounting the remote control

panel:

1 Open the control unit, and remove the wiring strips

holding the control panel’s cable.

2 Disconnect the cable’s grounding wires (labelled FG)

from the control panel and from the PWB_ICIF board in

the Control unit.

3 Disconnect the plugs and remove the control panel’s

cable.

GC80/85

CONTROL

UNIT

GC80/85

REMOTE PANEL

CONTROL

PANEL

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 111 112

Sem comentários

Simrad GC80 Manual de Instruções Página 43